The Bell TC11A Tracked Carrier is an engineered marvel, tailored for the most demanding conditions in mining, construction, forestry, and oil and gas sectors. With an 11-ton carrying capacity, this robust machine is built to perform in soft underfoot conditions where traditional vehicles falter.
TC11A
- 177kw Engine Net Power
- 133L Hydraulic Tank Capacity
- 13,960 kg Vehicle Mass Unladen
Bell Tracked Carrier / TC11A
- Engine
- Hydraulic Systems
- Track
- Suspension
- Dumping System
- Load Bodies
- Electrical System
- CAB
- Vehicle Performance
- Vehicle Mass
- Unladen Ground Pressure
TYPE: Cummins B6.7
Net power: 177 kW (237 hp) @ 2000 rpm
Displacement: 6.7 litres (409 cu.in)
Fuel Tank Capacity: 190 litres (42 US gal)
Certification: The B6.7 meets EU Stage V emissions regulations
Hydraulic drive system: Electro-hydraulic pump control
Wheel drive system: Double reduction planetary track drive
Service brake: Hydrostatic brake
Park brake: Fail to safe Spring Applied
Hydraulic Released
Hydraulic Released
System pressure: 420 bar (6 092 psi)
Filtration: 13 micron spin-on filters
Hydraulic tank capacity: 152 litres (140 US gal)
Track type: Rubber tracks with steel inserts
Tensioning system: Manually adjusted grease cylinder
Roller quantity: 6 per side
Walking beam arrangement: Two terrain-response compound walking beams
Configuration: Two double-acting, single stage, dump cylinders
Flow rate: 92 litres (24 US gal) per minute
Raise time: 12 seconds
Lower time: 12 seconds
Tipping angle: 60 degrees for normal load bed 40 degrees for flat deck
Safety: Bin pole which locks bin in the up position
Standard: Load body with tailgate
Standard body capacity (SAE 2:1): 5.25 m3 (6.9 yd3)
Option: Tipping flat deck (which can be bolted down)
Voltage: 24 V
Battery type: Two AGM
Battery capacity: 2 X 75 Ah
Alternator rating: 70 Amp
Headlights: LED hella valuefit
Reverse camera: Standard
Extra lighting option: Optional LED bar light mounted to top of cab
Configuration: Dedicated cab developed by Bell
Steering: Single handed joystick controller
Air conditioning: HVAC system is standard fitment
Mirrors: Heated (optional) and remotely operated
Safety: ROPS/FOPS certified according to the following standards: ISO3471, ISO13459, ISO3449
Speed: 14 km/h (8.7 mph)
Gradient: 55% (29 degrees)
Unladen: 13 960 kg (30 777 lb)
Laden: 24 960 kg (55 027 lb)
Payload: 11 000 kg (24 251 lb)
6” Sinkage method: 0.19 kg/cm2 (2.72 psi)
Hard ground method: 0.33 kg/cm2 (4.72 psi)
